Pen, Ink & Paper
-
G George K referenced this topic on
-
@mark said in Pen, Ink & Paper:
@jon-nyc said in Pen, Ink & Paper:
Mark gets a new hobby and goes a little nuts with it. Who wouldโve guessed.
Hey! When I do something, I go all in!
Just checking in on this. My bet is that Mark is close to a dozen by now. Anyone want to take the over?
Anyway, how's the writing been going, Mark?
-
Just 3 (The Monteverde and Conklin with The Little Witch Kaweco enroute)
I am actually 3D printing one as I type this.
I have a spare converter and the original medium nib from the Monteverde. I found a ready to print model for them and I'm printing it using color changing filament. It should be a cool looking pen if it works. I will post a photo when it's done printing.
Writing is getting better. Well the penmanship anyway. lol I have been using them at work for everything! I love the looks I get when I use them. Like WTF?
-
@mark said in Pen, Ink & Paper:
Writing is getting better. Well the penmanship anyway. lol I have been using them at work for everything! I love the looks I get when I use them. Like WTF?
I never really use mine outside of the house. I mean sometimes I do, but never with anyone close enough to see what I'm writing with.
But one thing I like to do is keep a cool kind of ink in my Liliput and keep that on me. I have a nice, rich turquoise that has a serious amount of color variation to it, even on cheap paper, and thankfully it barely feathers. So, when I'm given something to sign, I'm given a ballpoint, but I use my pen (along with a fairly wide italic nib) and people are like "WTF did you use to write that?"
Maybe just get a friction fit converter? That pen looks awesome, Can it be polished so that the irregularities in the 3D printing can be smoothed out?
-
It's a silky finish filament and when you sand it, the silky surface gets dulled. I might try again with a .05mm layer height. I printed the first one with a .10mm layer height which is pretty much the limit of a .4mm nozzle. I will try a .05 layer height and will probably print it with a mat black filament this time. Using a .2mm nozzle is tricky and is prone to clogging but it is the proper way to get to .05mm layer height. The "hairs" inside the clip are unavoidable but I can clean them up with an exacto blade. I tried to vaporize them with a heat gun but it deformed the entire cap so that ended up in the recycle bin.
-
We drove to the heart of downtown Chicago this morning for our first visit to Atlas Stationers. https://www.atlasstationers.com/
So many pens! So much ink! Notebooks, accessories and very helpful and friendly staff.
Purchased my first Italian pen. A just released and not even on display yet, Visconti Comedia Purgatorio with a fine nib. It is the smoothest writing pen I own.
Found a beautiful leather pen/notebook case. Two Rhodia notebooks, A Pilot dip pen and an Atlas exclusive "ink of the week" Colorverse Wolf Point. It's a shimmering ink with tiny bits of glitter in it. Absolutely gorgeous ink.
The Mrs picked out a couple of cheap pens including a Pilot disposable fountain pen and a gel pen. She also found a small sketch pad.
D1 picked out 3 inks, notepads and a pack of Leaf color swatch papers.
We had a great time despite the overpriced parking. $59 for 90 minutes of parking!
I foresee more trips like this in the future.
We will be scoping out more affordable parking for our future visits though.
-
@George-K said in Pen, Ink & Paper:
@mark said in Pen, Ink & Paper:
scoping out more affordable parking
Spot Hero is your friend.
Thank you! I will check it out.
-
That's a great haul, Mark!
Visconti. I see we have an aristocrat in our midst.
(They do make really beautiful stuff.)
It's my birthday next week, so my wife and daughter got me a pen and some ink.
The pen is a white Pilot Metropolitan. But, the nib is a 1.1 I tuned myself. It writes better and more consistently than any other nib I have, including the gold ones.
The ink is Baltimore Canyon Blue. So, hey, local, but with some weird properties. It's the most intense blue ink I've ever used, and it's permanent, but the stuff does NOT bleed through. I tried using it with a 1.5 on the shittiest paper I had around and it was fine. Crazy.
Here's a sample:
-
Love the pen! The ink looks killer too.
I'm done buying for a while. I just reprinted some parts for my 3D printed pen and using the JOWO medium nib, and a stock cartridge that came with the Monteverde, it is writing very nicely.
Now if I only had something to write that was worthy.