RC and 3D Printing
-
wrote on 1 Feb 2022, 21:29 last edited by
Canopy parts 1 & 2 5.5 hour print job.
Thanks for clicking the link and viewing the video!
-
wrote on 1 Feb 2022, 21:45 last edited by
What's going to be the total time investment for this project, discounting the
fuckupsfailed prints? -
What's going to be the total time investment for this project, discounting the
fuckupsfailed prints?wrote on 1 Feb 2022, 22:27 last edited by mark 2 Jan 2022, 22:28@george-k said in RC and 3D Printing:
What's going to be the total time investment for this project, discounting the
fuckupsfailed prints?No clue. lol
It's many hours and then many more.
Printing is only part of the battle here. Gluing everything together and making sure it stays square and hoping the adhesion works well enough for airworthiness is going to take a long time. Then it's electronics and control installation time.
-
wrote on 2 Feb 2022, 03:18 last edited by
-
wrote on 2 Feb 2022, 04:30 last edited by
Progress of the printed pieces so far...
Bottle of wine near the tail for scale.
-
wrote on 2 Feb 2022, 04:43 last edited by
@mark said in RC and 3D Printing:
Progress of the printed pieces so far...
Bottle of wine near the tail for scale.
Holy cow that's huge!
This is such a great project, Mark. I can't wait to see it fly.
-
@mark said in RC and 3D Printing:
Progress of the printed pieces so far...
Bottle of wine near the tail for scale.
Holy cow that's huge!
This is such a great project, Mark. I can't wait to see it fly.
wrote on 2 Feb 2022, 12:10 last edited by@brenda Thanks! I hope I can get it in the air this spring.
2nd set of 2 Elevators. 4.5 hour print job.
Click please!
-
@brenda Thanks! I hope I can get it in the air this spring.
2nd set of 2 Elevators. 4.5 hour print job.
Click please!
-
@mark I'll be interested to see how much work is involved in getting it ready to fly - electronics, assembly, control-surfaces, etc.
Post pics when you get to that part.
wrote on 2 Feb 2022, 16:54 last edited by -
wrote on 3 Feb 2022, 00:55 last edited by
-
@George-K if you look at the stream right now you will see a failed print sitting there. I am waiting for the bed to cool before I remove it.
Something went wrong with the G-Code generation.
wrote on 3 Feb 2022, 00:57 last edited by@mark said in RC and 3D Printing:
Something went wrong with the G-Code generation
Please repeat in English.
-
@mark said in RC and 3D Printing:
Something went wrong with the G-Code generation
Please repeat in English.
wrote on 3 Feb 2022, 03:25 last edited by mark 2 Mar 2022, 03:26@george-k said in RC and 3D Printing:
@mark said in RC and 3D Printing:
Something went wrong with the G-Code generation
Please repeat in English.
There is an application call a Slicer. It takes the 3d model and slices it into layers. Then it tells the printer the speed, and 3D coordinates to move the print head and bed, the extrusion rate of the material, the temperature of the print head (hot end) the temperature of the bed, and a lot more parameters like fan speed for cooling the extrusion as it is deposited, etc.
G-Code. It's basically been around since the invention of the Jacquard Loom.
-
wrote on 3 Feb 2022, 03:39 last edited by
Motor Mount re-print after a mis-step on the printer that lead to a blob of plastic causing a crash of the print head.
Click the link!
-
wrote on 3 Feb 2022, 11:00 last edited by
-
wrote on 3 Feb 2022, 15:35 last edited by
Wing End Caps 3 hour print job
Click it!
https://oe.ink/l/NwouUgqHix -
wrote on 3 Feb 2022, 20:21 last edited by
RC Airplane Wing End Caps in white. 3 hour print job.
Decided to have the top half in blue and the bottom half in white. Just another visual clue to help see when the airplane is inverted.
Click the link!