RC and 3D Printing
-
Frustrating. The 2nd attempt to print body segment 12 in PLA, failed. Hopefully this one will work. Back to PETG but with some internal supports. |
New Stream! Click it!
-
Various things can make a print fail. In this instance, the walls on these parts are the thinnest I have ever seen in a 3D printed model. Every part has some "defects" that I need to go over with some epoxy and possibly some thin fiberglass cloth to rienforce the structural integrity.
The particular part failed the first time because I didn't use supports. The second time was due to it cracking apart when I attempted to remove it from the build plate.
-
Finally got Body segment 12 to print. Back to PETG filament.
Segments 13 & 14 printing now.
New stream. Click it!
-
Various things can make a print fail. In this instance, the walls on these parts are the thinnest I have ever seen in a 3D printed model. Every part has some "defects" that I need to go over with some epoxy and possibly some thin fiberglass cloth to rienforce the structural integrity.
The particular part failed the first time because I didn't use supports. The second time was due to it cracking apart when I attempted to remove it from the build plate.
@mark said in RC and 3D Printing:
The second time was due to it cracking apart when I attempted to remove it from the build plate.
I would love to have heard the words you used when that happened.
-
@mark said in RC and 3D Printing:
The second time was due to it cracking apart when I attempted to remove it from the build plate.
I would love to have heard the words you used when that happened.
@george-k said in RC and 3D Printing:
@mark said in RC and 3D Printing:
The second time was due to it cracking apart when I attempted to remove it from the build plate.
I would love to have heard the words you used when that happened.
It was definitely NSFW.
-
We will need the first flight video, posted here.
-
New Part. Body Segment 16. Motor mount and cowl are next.
Click the link!
-
@copper said in RC and 3D Printing:
We will need the first flight video, posted here.
+++ eleventy bajillion
@brenda Absolutely! Like I was trying to emote back to Copper, I hope it it not its last flight. lol
Last one tonight. The Engine Cowl. 10.25 hour print job.
I think I have enough filament on the roll but time will tell...
Click it! -
-
-
-
Canopy parts 1 & 2 5.5 hour print job.
Thanks for clicking the link and viewing the video!
-
What's going to be the total time investment for this project, discounting the
fuckupsfailed prints? -
What's going to be the total time investment for this project, discounting the
fuckupsfailed prints?@george-k said in RC and 3D Printing:
What's going to be the total time investment for this project, discounting the
fuckupsfailed prints?No clue. lol
It's many hours and then many more.
Printing is only part of the battle here. Gluing everything together and making sure it stays square and hoping the adhesion works well enough for airworthiness is going to take a long time. Then it's electronics and control installation time.
-
