Puzzle time - How many bits

[jon-nyc]

Yes find something smaller than 4.

I found 3 cleanly, and one solution that maxes at 3 with expected value 2.5 but it might be cheating. Haven’t seen official solution.

And of course they can have a strategy in common and are both aware of the 16 teams.

[Axtremus]

May be I can cheat by pre-compiling a dictionary of all possible outcomes and then use the timing of signal transmission to index into that dictionary. In that case only one “pulse” needs to be sent at the right time, which you can then argue is merely “one bit.”

[jon-nyc]

@axtremus said in Puzzle time - How many bits:

May be I can cheat by pre-compiling a dictionary of all possible outcomes and then use the timing of signal transmission to index into that dictionary. In that case only one “pulse” needs to be sent at the right time, which you can then argue is merely “one bit.”

[jon-nyc]

In engineering school I used to wonder why you couldn't, in theory, send an unlimited amount of information on a superconducting channel just by setting the voltage a very precise amount, say 3.141592674......

[Klaus]

@jon-nyc said in Puzzle time - How many bits:

In engineering school I used to wonder why you couldn't, in theory, send an unlimited amount of information on a superconducting channel just by setting the voltage a very precise amount, say 3.141592674......

Wouldn't the measurement influence the voltage? I guess that would be the main reason. Also, if you measure current, you'd at some point measure single electrons, which are discrete.

[Klaus]

@klaus said in Puzzle time - How many bits:

Does H know what K knows?

In that case, one bit would be sufficient. If both know it must be team A or team B, then H can send 0 for team A or 1 for team B.

[Klaus]

@horace said in Puzzle time - How many bits:

What is K wearing?

:::

Spoiler Text

:::

[jon-nyc]

@klaus said in Puzzle time - How many bits:

@klaus said in Puzzle time - How many bits:

Does H know what K knows?

In that case, one bit would be sufficient. If both know it must be team A or team B, then H can send 0 for team A or 1 for team B.

The puzzle states that K knows the two teams but not the winner and H knows only the winner but not the other team. What they both know in advance are the 16 possible teams and whatever strategy they devise.

[Klaus]

Hm. I think this one would work with two bits, but it would only work in 75% of all cases.

:::

K asks one of two boolean questions:

1. Even? - is the winning team on an even position
2. Lower? - is the winning team among the lower half of team numbers

Transmitting the question requires one bit, the answer requires one bit.

Of course, K is screwed if both teams have equal parity and are in the same half.
:::

and here's an extension of the idea with three bits that presumably works in 100% of all cases.

:::

K sends a second bit which asks H to either shuffle the team order or not before answering the question.

The shuffling is such that equal parity and equal half cannot happen in both the unshuffled and shuffled order. I'm not quite sure whether that's even possible, but let's call this a solution just for fucks sake!
:::

[jon-nyc]

I dont think you could get the second answer to work.

[Axtremus]

@klaus said in Puzzle time - How many bits:

@jon-nyc said in Puzzle time - How many bits:

In engineering school I used to wonder why you couldn't, in theory, send an unlimited amount of information on a superconducting channel just by setting the voltage a very precise amount, say 3.141592674......

Wouldn't the measurement influence the voltage? I guess that would be the main reason. Also, if you measure current, you'd at some point measure single electrons, which are discrete.

Yes, you can get precision only down to the Planck scale and then you're limited by Heisenberg's uncertainty principle.

[Klaus]

@axtremus said in Puzzle time - How many bits:

@klaus said in Puzzle time - How many bits:

@jon-nyc said in Puzzle time - How many bits:

In engineering school I used to wonder why you couldn't, in theory, send an unlimited amount of information on a superconducting channel just by setting the voltage a very precise amount, say 3.141592674......

Wouldn't the measurement influence the voltage? I guess that would be the main reason. Also, if you measure current, you'd at some point measure single electrons, which are discrete.

Yes, you can get precision only down to the Planck scale and then you're limited by Heisenberg's uncertainty principle.

My point was more immediate: Voltage is measured by sending a small current through a resistor. That current would necessarily cause a drop in the voltage.

[Axtremus]

Yes, I just go straight to the theoretical limit of known physics. :man-shrugging:

[jon-nyc]

Here's a solution that gets it with three bits every time:

:::

K and H have prearranged a mapping of teams to 4 bit binary codes. K sends a two bit message to H indicating a bit where the two teams' digital representation differs. H responds with the value of that bit. That gives K the answer in 3, every time.

:::

[jon-nyc]

An addendum to that that keeps max 3 but makes the expected value less than 2.5:

:::

Instead of always sending 2 bits to indicate the differing digit every time, send only one bit if it's bit 0 or 1. In other words, send:
0 -> 1st bit
1 -> 2nd bit
10 -> third bit
11 -> 4th bit

I don't feel like calculating the exact expected value, but given that many pairs of digital words will differ in multiple places, you can always choose to send the more efficient representation when possible. Therefore it should be < 2.5.

:::

[Klaus]

I like your 3 bit solution, but the 2.5 bit one looks unsound.

If you send messages of variable length, you'd have to transmit the length of the message. Otherwise you could easily cheat by saying that "the empty message", for instance, also transmits information.

[jon-nyc]

@klaus said in Puzzle time - How many bits:

I like your 3 bit solution, but the 2.5 bit one looks unsound.

That's why I wrote this earlier:

I found 3 cleanly, and one solution that maxes at 3 with expected value 2.5 but it might be cheating.

[Axtremus]

@jon-nyc said in Puzzle time - How many bits:

Here's a solution that gets it with three bits every time:

:::

K and H have prearranged a mapping of teams to 4 bit binary codes. K sends a two bit message to H indicating a bit where the two teams' digital representation differs. H responds with the value of that bit. That gives K the answer in 3, every time.

:::

:::

How does it work when two teams’ binary representation differ by two or more bits?

:::

[jon-nyc]

Ax - just pick one. Doesn't matter. A value for any of them will tell Klaus who the winner is.

[Klaus]

Here's a quite simple strategy with an expected number of bits of only 1.875.

H sends 0 if the winner is in the first half and 1 else.

With probability 0.5 K knows the winner after this one bit.

Then H sends 0 if the winner is in the first half of the remaining half and 1 else.

With probability 0.25 K knows the winner after the second bit.

Continuing similarly, K knows the winner after 3 bits with probability 0.125 and after 4 bits with 0.125.

On average, that makes 1.875 bits.

One slightly inelegant aspect of the approach is that H doesn't know when to stop sending bits.