3D Printers
-
@brenda said in 3D Printers:
@mark mark, those are adorable! Can you do greens and grays or browns? I love those!
The materials are available in a wide variety of colors. There is even a "rainbow" filament that changes colors during the printing process.
-
@brenda I am going to print a papa and some babies. We will have our own little family of froggos. But without the mess of biology getting in the way.
@mark said in 3D Printers:
@brenda I am going to print a papa and some babies. We will have our own little family of froggos. But without the mess of biology getting in the way.
Print a momma, too.
If you need adorable photos for a reference, I might have some.
Action shot:
From this morning:
Another from the 'there's always one' category:
-
*Picks up microphone
"Brenda, on behalf of all the people at TNCR, past, present and anonymous, let me express my gratitude for all the hard and noble work you've done with the froggos. You've not only given them a save place to grow, but also provided us with many hours of (virtual) enjoyment with your pictures.
You are a treasure, and the froggos are grateful as well!"
*Puts mic back on podium and graciously steps away.
-
@brenda
I am currently printing a 200% size froggo in what is labeled as "fast color changing" rainbow filament. I don't think it is changing color fast enough for this print job. I will probably end up with a golden froggo.I took a short video of it being printed...
Link to videoIt has about 2 hours remaining on the print job. The total print time is 6.5 hours
-
@brenda
I am currently printing a 200% size froggo in what is labeled as "fast color changing" rainbow filament. I don't think it is changing color fast enough for this print job. I will probably end up with a golden froggo.I took a short video of it being printed...
Link to videoIt has about 2 hours remaining on the print job. The total print time is 6.5 hours
-
-
@brenda lol
This is it. I am done with these critters for a while.
Currently printing a 300% version of this Ghost ship in the color changing filament. It's a 26.5 hour print job.
-
The 26 hour ghost ship print failed about 1/4 of the way through. Corrupted G-Code it seems. I will try again someday but I have other projects in mind first.
This is the current print happening right now. It has about a 13.5 hour print time. It is a case for a Raspberry Pi 4b 4GB with a HyperPixel 4 capacitive touch screen. I am going to use it for the Octoprint app running under Linux to remotely monitor and control the 3D printer. The system will have a hi-res camera watching the print bed. It will ride along the Z axis so I can monitor the nozzle visually anytime during a print.
I laid all three parts out to print at the same time. It downloads as three separate files.
I am printing it in Jet Black.
-
The Raspberry Pi case turned out good after a couple of failed attempts to print everything at once. I separated them into 3 different print jobs and it worked much better. Not crazy about the case design.
In the latest development, the Raspberry Pi is now feeding the printer and streaming video of the process.
I worked on the Raspberry Pi and the HQ raspiCamera until 3:00 am this morning. The time involved included the fact that I was attempting to install a cooling fan which involved some soldering. But then the supports for the fan broke off in the case, and a few choice words were spoken. De-soldered. No fan for now. Installed heatsinks. I tried for a long time to get Octoprint to work with the camera, but I ended up frustrated and decided to go with the mjpg_streamer method. The process involved compiling mjpg_streamer and creating a script so it auto starts on boot. Yes, that was easier then getting Octoprint to see this camera. lol I could find very little out there about it.
In any browser on my LAN, I enter http://raspberrypi.local:8080/stream_simple.html
The first print I did with the Octoprint controlling things was of course an articulated octopus.
